JR20 Thermal Overload Relay
Specifications
Structural Feature
| Model | Rated insulation voltage Ui (V) | Thermoelement | Rated current range (A) | Corresponding AC contactor |
| JR20-10 | 660 | 1R | 0.1~0.13~0.15 | CJ20-10 |
| 2R | 0.15~0.19~0.23 | |||
| 3R | 0.23~0.29~0.35 | |||
| 4R | 0.35~0.44~0.53 | |||
| 5R | 0.53~0.67~0.8 | |||
| 6R | 0.8~1~1.2 | |||
| 7R | 1.2~1.5~1.8 | |||
| 8R | 1.8~2.2~2.6 | |||
| 9R | 2.6~3.2~3.8 | |||
| 10R | 3.2~4~4.8 | |||
| 11R | 4~5~6 | |||
| 12R | 5~6~7 | |||
| 13R | 6~7.2~8.4 | |||
| 14R | 7~8.6~10 | |||
| 15R | 8.6~10~11.6 | |||
| JR20-16 | 1S | 3.6~4.5~5.4 | CJ20-16 | |
| 2S | 5.4~6.7~8 | |||
| 3S | 8~10~12 | |||
| 4S | 10~12~14 | |||
| 5S | 12~14~16 | |||
| 6S | 14~16~18 | |||
| JR20-25 | 1T | 7.8~9.7~11.6 | CJ20-25 | |
| 2T | 11.6~14.3~17 | |||
| 3T | 17~21~25 | |||
| 4T | 21~25~29 | |||
| JR20-63 | 1U | 16~20~24 | CJ20-40 CJ20-63 |
|
| 2U | 24~30~36 | |||
| 3U | 32~40~47 | |||
| 4U | 40~47~55 | |||
| 5U | 47~55~62 | |||
| 6U | 55~63~71 | |||
| JR20-160 | 1W | 33~40~47 | CJ20-100 CJ20-160 |
|
| 2W | 47~55~63 | |||
| 3W | 63~74~84 | |||
| 4W | 74~86~98 | |||
| 5W | 85~100~115 | |||
| 6W | 100~115~130 | |||
| 7W | 115~132~150 | |||
| 8W | 130~150~170 | |||
| 9W | 144~160~176 | |||
| JR20-250 | 1X | 130~150~170 | CJ20-250 | |
| 2X | 167~200~250 | |||
| JR20-400 | 1Y | 200~250~300 | CJ20-400 | |
| 2Y | 267~335~400 | |||
| JR20-630 | 1Z | 320~400~480 | CJ20-630 | |
| 2Z | 420~525~630 |
● Internal structure: Insert combination or independent structure; three-dimensional structure, pull spring blade jump action mechanism; with phase failure and temperature compensation structure.
● Installation operation: with action tripping flexibility inspection, action tripping indication and disconnection inspection and other functions; optional manual reset and automatic reset; normally closed and normally open auxiliary contacts insulated and separated
● Note: The 10R and below specification in JR20-10 does not include a phase failure protection device.
Basic parameters of auxiliary circuit
| Utilization Category | Rated frequency | Rated insulation voltage (Ui) | Rated operational voltage (Ue) | Rated operational current (Ie) | Conventional thermal current | Auxiliary contact |
| AC-15 | 50Hz | 380V | 127V | 2.83A | 6A | NC 95-96 |
| 220V | 1.64A | |||||
| 380V | 0.95A | |||||
| 220V | 0.82A | 6A | NO 97-98 | |||
| 380V | 0.47A |
Operation characteristics
| No. | Setting current multiples | Action time | Initial condition | ||
| Operation characteristics when negative each phase is balanced | |||||
| 1 | 1.05 | No action in 2h | Cold | ||
| 2 | 1.2 | Action in 2h | Thermal (after No. 1 test) | ||
| 3 | 1.5 | ＜2min | ＜4min | Thermal (after No. 1 test) | |
| 4 | 7.2 | 2s＜Tp≤10s | 4s＜Tp≤10s | Cold | |
| 5 | 1.0 | No action in 2h | Cold | ||
| 6 | 1.2 | Action in 2h | Thermal (after No. 5 test) | ||
| 7 | 1.05 | No action in 2h | Cold | ||
| 8 | 1.3 | Action in 2h | Thermal (after No. 7 test) | ||
|
Operation characteristics when negative each phase is unbalanced |
|||||
| Any two phase | Third phase | ||||
| 1 | 1.10 | 0.9 | No action in 2h | Cold | |
| 2 | 1.15 | 0 | Action in 2h | Thermal (after No. 1 test) | |
Outline and lnstallation Dimension
Outline and lnstallation Dimension of JR20-10Z/JR20-16Z/JR20-25Z/JR20-63Z/JR20-160Z
| Thermal Relay |
A |
B |
C |
D |
E |
F |
G |
H |
K |
a |
M1 |
M2 |
φ |
| Model | Feature | ||||||||||||
| JR20-10 | Z | 44 | 77.5 | 101 | 57.8 | 10 | 4.5 | 13.9 | 32 | ||||
| L | 44 | 70 | 101 | 46 | 14 | 4.5 | 8.9 | 32 | M5 | ||||
| G | 44 | 70 | 112 | 53 | 14 | 8.9 | M5 | ||||||
| JR20-16 | Z | 44 | 78 | 101 | 71 | 14 | 4.5 | 12.9 | 32 | ||||
| L | 44 | 70 | 101 | 46 | 14 | 4.5 | 8.9 | 32 | M5 | ||||
| G | 44 | 70 | 112 | 53 | 14 | 8.9 | 5.2 | M5 | |||||
| JR20-25 | Z | 47.5 | 82.5 | 117 | 66 | 20.5 | 4.5 | 32 | |||||
| L | 44 | 70 | 117 | 46 | 14 | 8.9 | 5.5 | 32 | M5 | ||||
| G | 44 | 70 | 117 | 53 | 14 | 5.5 | 8.9 | 6.5 | M5 | ||||
| JR20-63 | Z | 64 | 90 | 117 | 82 | 20 | 5.5 | 46 | |||||
| 70 | 90 | 117 | 92 | 28 | 5.5 | 46 | |||||||
| L | 65 | 80 | 117 | 62 | 23 | 5.5 | 46 | M6 | |||||
| 65 | 80 | 117 | 62 | 23 | 46 | M6 | |||||||
| G | |||||||||||||
| 7 | |||||||||||||
| JR20-160 | Z | 104 | 100 | 152 | 87.5 | 87.5 | 29 | 37 | M6 | M8 | 7 | ||
| 104 | 100 | 152 | 87.5 | 87.5 | 45 | 37 | M6 | M8 | |||||
| L |
Product Features
● Ambient temperature: The average value does not exceed +35°C in 24 hours.
● Altitude: no more than 2000m.
● Atmospheric conditions: The relative humidity does not exceed 50% at +40°C, and higher relative humidity may be allowed at lower temperatures. For example, 90% at 20°C, special measures should be taken for the occasional condensation due to temperature changes.
● Pollution level: 3 levels.
● Installation category: Class III.
● Installation conditions: The inclination of the installation face and the vertical is not more than ±5°.In addition to mounting screws, the relay can also use 35mm standard rail.
● Shock vibration: The relay should be installed and used in places where there is no significant shaking, shock and vibration.
● Transportation, Storage: The relay should not be subject to severe impact and vibration during transportation, and it must not be affected by rain or snow in transportation and storage. Relays are suitable for transport and storage at -25°C ~ +55°C, and at +70°C for short periods (in 24h).
Contact Us