Arc Fault Protector AFDD-63L
The fault arc protector, hereinafter referred to as the protector, effectively detects the fault arc in the access line, including the fault parallel arc and the fault series arc. When it detects that there is a fault arc that causes a fire in the line, the outlet power-off function can be carried out to achieve the purpose of warning of the occurrence of a fire.
Product Description
Product introduction
The fault arc protector, hereinafter referred to as the protector, effectively detects the fault arc in the access line, including the fault parallel arc and the fault series arc. When it detects that there is a fault arc that causes a fire in the line, the outlet power-off function can be carried out to achieve the purpose of warning of the occurrence of a fire.
The fault arc protector is suitable for electrical lines of 10KW and below in industrial and civil buildings, and the length of the protection line should not be more than 100 meters.
The product follows the GB/T 31143-2014 IEC62602 standard, which can it is suitable for nursing homes, schools, commercial buildings, hotels, factories, warehouses, libraries, offices, family
Product interface description
Note:
● When the product is in alarm mode, the detection function works normally.
● When the product is in the alarm indication, the alarm needs to be lifted before the unlocking experiment can be carried out.
● After turning off the arc detection function, the leakage function can work normal
Specifications
| Product | Data |
| Model | AFDD-63L |
| Working power supply | Rated voltage AC230V |
| Rated frequency | 50 Hz |
| Monitor and alarm | Fault arc alarm Load below AC40A |
| Voltage | Rated value AC230V |
| Power supply | Rated value AC63A and below |
| External size | 1P+N/95.5*36*72.5 |
| Installation method | 35mm rail installation |
| Ability to split | Rated short-circuit breaking capacity icn(KA):6.0 |
| Cable of wiring | 1 to 25 mm2 |
| Characteristics of release | C, D |
| Electrostatic discharge anti-drying | Air discharge >8; contact discharge >6 |
| Pulse group anti-interference | 4KA. |
| Surge impact interference | 4KA. |
| Use ambient temperature | -23~+55℃ |
| Moisture and heat resistance | Category 2 |
| Height above sea level | 2000 m |
| Installation environment | Places without significant vibration and impact |
Product Features
Operating instructions
The number indicates the working mode (please do not adjust it if it is not necessary).
Ø Flash 1 time: disable mode. At this time, the arc detection function is turned off, and the RUN running light will be turned off.
Ø Flashing 2 times: anti-interference mode
Ø Flash 3 times: standard mode (default)
Ø Flashing 4 times: hypersensitive mode
Contact Us